www.design-reuse.cn
129 "IoT Design Solutions" Solutions

1
ARC Data Fusion Voice/Speech Option
The DesignWare® Smart Data Fusion IP Subsystem is a complete, pre-verified, hardware and software solution optimized for a wide range of ultra-low power IoT applications.

2
ARC IoT Development Kit
The DesignWare® ARC® IoT Development Kit is a versatile platform that includes the necessary hardware and software to accelerate software development and debugging of sensor fusion, voice recognition and face detection designs

3
Arm Artisan IoT POP IP
Arm IoT POP IP helps accelerate the implementation of IoT SoCs by offering physical IP as well as reference designs and know-how to develop a design that has optimal performance with minimum area.

4
Arm Cordio-B50
The Arm Cordio-B50 is a Bluetooth 5 modem, protocol processing logic and link layer controller delivered as soft IP, with power intent and implementation IP, associated testbenches and link layer firmware. Cordio-B50 supports changes enabled by the Bluetooth 5 radio including the 2 Mbps mode, Long range, and advertising extensions.

5
Arm Cordio-B50 radio IP
The Arm Cordio-B50 radio IP is a complete self-contained radio subsystem supporting Bluetooth 5 protocol available at TSMC 55nm LP/ULP, TSMC 40nm LP/ULP and UMC 55nm ULP process nodes. The solution consists of the RF 2.4GHz transceiver, modem, protocol processing logic and link controller along with link layer firmware.

6
Arm Cordio-B50 stack
The Arm Cordio stack is designed specifically for Bluetooth low energy single-mode products catering to the power sensitive Internet of Things (IoT) market. With its small code size, easy-to-use APIs, and portable architecture, the Cordio stack is a superior solution for companies looking to develop Bluetooth low energy semiconductors while reducing time-to-market.

7
Arm Cordio-C50
The Arm Cordio-C50 is a Bluetooth 5 modem, a 802.15.4-2006 modem, protocol processing logic and link and MAC layer controller delivered as soft IP, with powerintent and implementation IP, associated test-benches and link layer and MAC firmware.

8
Arm Cordio-C50 radio IP
Arm Cordio-C50 radio IP is a complete self-contained radio sub-system supporting Bluetooth 5 and IEEE 802.15.4 protocols available at TSMC 55nm LP/ULP, TSMC 40nm LP/ULP, and UMC 55nm ULP process nodes. The solution consists of the RF 2.4GHz transceiver, modem, protocol processing logic and link and MAC controller along with link and MAC layer firmware.

9
Arm Cordio-E154
The Arm Cordio-E154 is an 802.15.4-2006 modem, protocol processing logic and MAC layer controller delivered as soft IP, with power intent and implementation IP, associated test-benches and MAC firmware.

10
Arm Cordio-E154 radio IP
The Arm Cordio-E154 radio IP is a complete self-contained radio subsystem supporting the IEEE 802.15.4 protocol available at TSMC 55nm LP/ULP, TSMC 40nm LP/ULP and UMC 55nm ULP process nodes. The solution consists of the RF 2.4GHz transceiver, modem, protocol processing logic and MAC controller along with MAC layer firmware.

11
Arm CoreLink SSE - 200 subsystem
The CoreLink SSE-200 subsystem is the foundation on which SoC designers will build a new generation of secure IoT products.

12
Arm Cortex - M23 and Cortex - M33
Arm Cortex-M23 and Cortex-M33, the first in a new family of Arm v8-M based processors, bringing proven Arm TrustZone technology to secure even the smallest of embedded devices. Licensed by the majority of the top 10 global MCU suppliers and backed by the world s No. 1 embedded ecosystem.

13
Arm Kigen Sim Solutions
Arm Kigen provides a portfolio of Subscriber Identity Module (SIM) solutions built on the latest cellular standards and specifications.

14
Arm mbed cloud
The scalable solution for IoT device management challenges, built for you.

15
Arm Platform Security Architecture (PSA)
The Platform Security Architecture (PSA) is a holistic set of threat models, security analyses, hardware and firmware architecture specifications, and an open source firmware reference implementation.

16
Bluetooth low energy Link Layer IP compliant with Bluetooth 5
Compliant with the latest Bluetooth low energy specification v4.2 with a roadmap to Bluetooth 5, Synopsys designWare Bluetooth Link Layer IP delivers low power wireless connectivity for Internet of Things (IoT) System-on-Chips (SoCs).

17
Brite YouSiP-IoM Internet of Meter platform
YouSiP-IoM is an innovative interconnection SoC solution for smart meters developed by Brite. This platform bases on ARM Cortex A7 and Cadence Tensilica LX6 DSP architecture which can provide strong core computing and communication capability.

18
Brite YouSiP-IOT IOT Platform
YouSiP-IoT is a comprehensive platform solution designed for emerging application as IoT based on SMIC 55nm low leakage (LL) and 95nm ultra low power (ULP) process which can provide embedded non-volital flash memory as well.

19
CoreLink CMN-600 Coherent Mesh Network for IoT
This is a scalable, high performance interconnect that has been optimized and validated with the latest Arm v8-A processors.

20
CoreLink S I E - 200
CoreLink SIE-200 provides IP blocks built on top of the AMBA 5 AHB5 interface that extends TrustZone security to the system. The interconnect and TrustZone controllers provide a hardware-enforced isolation between secure and non-secure applications.

21
Cortex-M23 Processor
The Arm Cortex-M23 introduces the latest generation of the Arm Cortex-M product family. Based on the Armv8-M baseline architecture, it is the smallest and most energy efficient Arm processor with Arm TrustZone security technology. The Cortex-M23 is the ideal processor for constrained embedded applications requiring efficient security.

22
Cortex-M33 Processor
The Arm Cortex-M33 is the most configurable of all Cortex-M processors. It is a full featured microcontroller class processor based on the latest Arm v8-M architecture with Arm TrustZone security and digital signal processing.

23
DesignWare ARC Data Fusion IP Subsystem
A complete, pre-verified, hardware and software solution optimized for a wide range of ultra-low power IoT applications. It is designed for fast and easy integration within a larger system context.

24
DesignWare Bluetooth Low Energy IP Solutions
Synopsys complete DesignWare Bluetooth Low Energy IP solution, compliant with Bluetooth 5 and Bluetooth mesh, consists of silicon-proven PHYs and Link Layer IP.

25
DesignWare Data Converter IP Solutions for IoT
Data converters are at the core of every analog interface to systems-on-chips (SoCs), which are moving into more advanced processes to take advantage of process scaling.

26
DesignWare Smart Data Fusion IP Subsystem for IoT
This IP Subsystem is a complete, pre-verified,hardware and software solution optimized for a wide range of ultra-low power IoT applications. It is designed for fast and easy integration within a larger system context.

27
Display unit and graphics accelerator for IoT and wearables
Vector graphics | Fill/Clear | BLT | Blend | Scale | Any Angle Rotation | Perspective Transformation | Programmable Shader | ARGB8, RGB565, A8 and other optional formats | Color Conversion | On-the-fly compression

28
Galaxy Design Platform
The Galaxy Design Platform is a comprehensive solution for cell-based and custom IC implementation. Galaxy accepts design intent in industry standard formats and generates a production ready IC design in GDSII format.

29
GC Nano Ultra-MCU/MPU OpenGL ES 2.0 GPU for Wearables and IoT
GCNano is a complete OpenGL ES 2.0 GPU architected for MCU / MPU systems with limited power, memory, and bandwidth configurations.

30
GCNano Ultra 3-MCU/MPU OpenGL ES 3.0 GPU for Wearables and IoT
OpenGL ES 3.0/2.0 / 1.1 | OpenVG 1.1 | 720p @ > 60FPS (UI Resolution and Performance) | Up to 400M Pixels/sec | Up to 40M Triangles/sec | Up to 200M Vertices/sec | 1.6 mm2 (28nm)

31
GCNano-MCU/MPU OpenGL ES 2.0 GPU for Wearables and IoT
This is a complete OpenGL ES 2.0 GPU architected for MCU / MPU systems with limited power, memory, and bandwidth configurations.

32
GF L013LP 130nm IoT PLL - 30MHz-225MHz
The IoT PLL is designed for very low power, sipping only 45uW at 30MHz and running from core power.

33
GF/CP L28SLP 28nm IoT PLL - 30MHz-550MHz
The IoT PLL is designed for very low power, sipping only 45uW at 30MHz and running from core power.

34
GF/CP L40LP 40nm IoT PLL - 30MHz-375MHz
The IoT PLL is designed for very low power, sipping only 45uW at 30MHz and running from core power.

35
GF/CP L55LP 55nm IoT PLL - 30MHz-400MHz
The IoT PLL is designed for very low power, sipping only 45uW at 30MHz and running from core power.

36
GF/CP L55LPE 55nm IoT PLL - 30MHz-300MHz
The IoT PLL is designed for very low power, sipping only 45uW at 30MHz and running from core power.

37
GF/CP L65LP 65nm IoT PLL - 30MHz-400MHz
The IoT PLL is designed for very low power, sipping only 45uW at 30MHz and running from core power.

38
GF/CP L65LPE 65nm IoT PLL - 30MHz-300MHz
The IoT PLL is designed for very low power, sipping only 45uW at 30MHz and running from core power.

39
Highly powerful and scalable multi-mode communication processor for IoT wireless applications
This processor is optimized for IoT communication applications as well as UE terminals; delivers highly powerful vector capabilities alongside a general computation engine to supply the performance and flexibility demanded by various IoT communication applications.

40
Highly powerful, multi-mode communication processor for IoT wireless applications
It delivers highly powerful vector capabilities alongside a general computation engine to supply the performance and flexibility demanded by various IoT communication applications, while meeting the strict demands for power efficiency and low cost.

 | 
 Previous Page
 | 1 | 2 | 3 | 
Next Page 
 | 
 Back

业务合作

访问我们的合作伙伴页面了解更多信息

广告发布

访问我们的广告选项

添加产品

供应商免费录入产品信息

© 2018 Design And Reuse

版权所有

本网站的任何部分未经Design&Reuse许可,
不得复制,重发, 转载或以其他方式使用。